VW Amarok Mk1 Additional Reverse & Brake light Plug And Play Piggyback Loom

£26.99

Plug-and-play VW Amarok Mk1 rear piggyback loom providing reverse and brake signals for auxiliary lighting without cutting or splicing factory wiring.

In stock

Description

VW Amarok MK1 Additional Reverse & Brake Light Piggyback Loom

Plug & Play | VW Amarok MK1 | AutoVolt Solutions

This exclusive AutoVolt Solutions plug & play wiring loom makes adding extra rear lighting to your
VW Amarok MK1 simple, safe, and completely reversible.

Designed for drivers who want improved visibility, it allows easy connection of additional
reverse lights and brake lights
without cutting, splicing, or interfering with your factory wiring.

This is an AutoVolt designed solution, developed from the same proven piggyback loom approach that has worked brilliantly for the
Ford Ranger, Toyota Hilux, Nissan Navara, Mitsubishi L200 and Ford Transit Custom.
It is built to OEM standards for a clean, professional finish and reliable long-term performance.

Perfect for

  • Adding extra reverse lights such as our powerful Ultra Slim Reverse Lights
  • Installing additional brake lights on accessories such as rear bars, racks, canopies or work bodies

Installation couldn’t be easier: simply plug it in, connect your earth, and wire your lights as required.

Wiring outputs

⚫ Earth (–)
🟡 Reverse light (+)
🔴 Brake light (+)

Important note on load and relay use

This loom is designed to support additional LED reverse lighting setups, it is important to keep the electrical load sensible.
If you plan to run more than one additional reverse light or a higher-power lighting setup, a relay loom should be used.

In a relay setup, the piggyback loom provides a safe trigger signal only, while the lights draw power directly from the battery through a fused supply.
This protects the vehicle circuit, reduces the risk of warning lights, and allows for easy future expansion.

New to piggyback looms? Read our guide explaining how they work and how to wire auxiliary lighting safely:

Piggyback wiring looms & LED grille lights guide

Frequently Asked Questions

What lights can I use with the additional reverse light output?

This loom has been tested and validated using our own
ultra slim reverse light, which we know operate correctly with the vehicle electronics. Other 12V LED reverse lights will also work, however it is up to yourself to check the safe load and spec as all aftermarket lights and designs vary between manufacturers.

What is the maximum wattage I can run on the additional reverse light output?

We recommend a maximum of around 20 watts total load when connecting lights directly to the reverse circuit. While higher wattage setups may function, exceeding this recommendation can place unnecessary strain on the vehicle circuit and control modules. For higher power lighting, a relay loom should always be used to safely draw power directly from the battery.

Can I fit two additional reverse lights?

Yes, you can fit two additional reverse lights. However, if you are fitting more than one lamp, we strongly recommend using a dedicated reverse light relay loom. This protects the vehicle circuit by using the reverse signal as a trigger only, while powering the lights safely from a fused battery supply.
We offer a purpose made relay loom designed specifically for this application which is available
HERE

Do I need a relay loom for one reverse light?

For a single low power LED reverse light, a relay loom is not required, provided the light does not exceed the recommended power rating outlined above.

Will this loom cause warning lights or CANBUS faults?

When used as intended and within the recommended load limits, this loom does not cause warning lights or CANBUS errors. Issues are most commonly caused by connecting too high of a power light without the use of a relay.

Is this loom plug and play?

Yes. This loom is fully plug and play and connects using factory style connectors with no cutting, splicing or permanent modification required to the vehicle wiring.

Can I damage my vehicle by using this loom?

When installed correctly and used within the recommended specifications, this loom is safe and does not damage the vehicle. Problems typically arise when excessive load is added without a relay or when unsuitable lighting is used. Following the guidance above ensures safe operation.

Installation Video

Additional information

Weight 200 g
Dimensions 25 × 17 × 5 cm

Reviews

There are no reviews yet.

Be the first to review “VW Amarok Mk1 Additional Reverse & Brake light Plug And Play Piggyback Loom”

Your email address will not be published. Required fields are marked *

SKU AMAROK-BLUE Categories , , Brand:
×