VW Transporter T7 High Beam & DRL Piggyback Loom | 2024+ | Standard LED Headlights

£49.00

AutoVolt’s exclusive plug-and-play high beam piggyback loom for the 2024+ VW Transporter T7 with standard LED headlights. Provides high beam trigger and separate DRL outputs with no cutting or splicing. Designed specifically by AutoVolt for the new T7 and not available elsewhere. Not suitable for IQ.LIGHT, Matrix or Adaptive headlights.

In stock

Description

High Beam Piggyback Loom for VW Transporter T7

This plug-and-play loom provides a safe high beam trigger output for fitting spotlights, roof lights, or light bars on the 2024+ VW Transporter T7 with standard LED headlights. It connects easily, with no wire cutting or splicing needed. As a result, installation is quick and clean.

This listing is for the piggyback loom only. No lights or relay are included.

Designed and created by AutoVolt Solutions specifically for the new VW Transporter T7 with standard LED headlights. This AutoVolt-designed plug-and-play wiring solution is exclusive to AutoVolt and is not available anywhere else.

Key Features

  • Safe high beam trigger for relay wiring
  • Separate DRL output on the red wire
  • Plug-and-play, no cutting or splicing
  • OEM-grade connectors and automotive wiring
  • Factory-style finish for a clean install
  • Designed and tested in the UK by AutoVolt Solutions Ltd

How It Works

Yellow wire: gives you a high beam signal output. You can use this to trigger your own relay setup so your additional lights come on with the main beam. (Relay not included.)

Red wire: a separate DRL output, for auxiliary lights with their own DRL function or low-voltage LED grille strip lights. If you’re not using this feature, simply leave the red and black wires disconnected.

Standard LED headlights only. This loom is not compatible with IQ.LIGHT, Matrix or Adaptive headlamps. Check which headlights your T7 has before ordering. The high beam output has only been tested on UK vehicles, and therefore may not be suitable for those outside the UK.

Need the Relay Side?

The yellow wire is a trigger signal only, it won’t power lights on its own. Our relay power loom plugs straight onto it and gives you a fused battery feed, 40A relay and inline switch to run the lights properly.

AutoVolt High Beam Relay Power Loom

Universal relay loom, works with any AutoVolt piggyback high beam output. Skip it if your lights came with their own relay harness.

Installation

To ensure proper function, install the loom on the same side as the vehicle’s main battery, the UK nearside (left/passenger) or passenger side in countries with right-hand traffic.

As always, a qualified auto electrician should carry out the installation. Incorrect fitting could damage the vehicle’s Body Control Module (BCM). Therefore, it’s important to follow standard safety procedures.

Before beginning, double-check compatibility and wiring orientation to avoid errors.

Important Notice

AutoVolt Solutions Ltd takes no responsibility for damage caused by incorrect installation or the use of poor-quality aftermarket LED strips.

In particular, low-grade LED products can overheat and cause electrical faults. To prevent this, always use properly rated lighting equipment that meets vehicle standards.

Ultimately, safe installation and quality components ensure long-term reliability.

Warranty

12 months from date of purchase. Covers manufacturing and design defects under normal use. Excludes fitting labour, consequential loss and damage to adjoining parts. Void if the unit is modified.

Price includes 20% VAT.

Additional information

Weight 100 g
Dimensions 27 × 20 × 5 cm

Reviews

There are no reviews yet.

Be the first to review “VW Transporter T7 High Beam & DRL Piggyback Loom | 2024+ | Standard LED Headlights”

Your email address will not be published. Required fields are marked *

Secret Link
×