Ford Transit Custom 2024+ Rear 12V Socket Loom | Plug & Play Ignition-Switched Kit

Ford Transit Custom 2024+ Rear 12V Socket Loom Ignition-Switched Kit. Automotive wiring solution with compatibility and fitting information shown on the product page.

Description

Ford Transit Custom 2024+ Rear 12V Socket Loom

Plug & Play Ignition-Switched Accessory Socket Kit

Add a proper 12V power socket to the rear of your new-shape Transit Custom without cutting into the loom or touching the fuse box. This plug-and-play kit taps the factory Customer Connection Points under the driver’s seat, so the socket is live only with the ignition on and the engine running. No drain on your battery when the van is parked, and no guesswork wiring.

Why Fit One

▸ Plug and play. Connects to the factory Vehicle Interface Connector, with no splicing into the wiring harness.

▸ Ignition-switched. Powered only with the ignition on, so there is no parasitic battery drain.

▸ 8 metres of cable. Enough reach to fit the socket on either the driver’s or passenger side of the van.

▸ Cut to length. Trim the cable to suit your run and rejoin it with the supplied heat-shrink clamp for a clean, weatherproof finish.

▸ No fuse box work. Feeds from the factory 60A Customer Connection Points, not a piggyback fuse tap.

▸ Rear power where you need it. Ideal for fridges, compressors, lighting, chargers and accessories in the load area.

▸ Illustrated instructions included. Clear step-by-step fitting guide with photos for a tidy, confident install.

How It Works

The loom connects directly to the factory Customer Connection Points and Vehicle Interface Connector beneath the driver’s seat, then routes its 8 metre cable to your chosen point at the rear of the van. Cut the cable to length if needed and rejoin it with the supplied heat-shrink clamp. The socket earths to a factory stud, and once fitted it simply works whenever the van is running.

What’s In The Kit

• Pre-wired AutoVolt loom with 8 metres of cable

• 12V accessory socket and collar

• Heat-shrink clamp for rejoining cut cable

• Supplied fixing nut

• Step-by-step illustrated fitting instructions

See exactly what’s involved before you buy:

↓ Download Fitting Instructions (PDF)

Fitting Either Side

This kit is designed to fit either side of your van. With 8 metres of cable supplied, you can route the socket to the driver’s side or the passenger side, cut the cable to your chosen length, and rejoin it with the supplied heat-shrink clamp. Please note: the driver’s side has a factory hole for the socket. Fitting to the passenger side will require drilling a hole, as there is no factory hole on that side.

Fitment

Ford Transit Custom, 2024 onwards (new shape). Designed for vans fitted with the factory Customer Connection Points and Vehicle Interface Connector under the driver’s seat. If you are unsure, message us before ordering and we will help you check.

⚠ Fitting Safety

The 60A feed is a live battery terminal. Take care not to touch any bare metal with your tools while working on it, and keep the ignition off until the loom is fully connected. Full guidance is included in the fitting instructions.

Why AutoVolt

Every AutoVolt loom is built to OEM spec and tested before it leaves us. We design plug-and-play wiring for real vehicles, back it with clear instructions, and offer direct UK support if you need a hand. Buy with confidence from a specialist who actually fits this stuff.

Power up the back of your Transit Custom the easy way. Order yours today.

Reviews

There are no reviews yet.

Be the first to review “Ford Transit Custom 2024+ Rear 12V Socket Loom | Plug & Play Ignition-Switched Kit”

Your email address will not be published. Required fields are marked *

SKU CUSTOM-REAR-12-VOLT-ADAPTER Category Brand:
Secret Link
×