Description
AutoVolt® Next Gen Ford Ranger 2023+ High Beam Wiring Kit
Plug-and-play high beam wiring to run an auxiliary light bar straight from your factory high beam. Choose the exact kit you need below, from the piggyback loom on its own through to a complete relay loom kit with two outputs.
Which option is right for me?
There are three ways to buy. Pick the option that matches what you already have and how you want to wire your lighting. If you are unsure, contact us before ordering and we will point you to the right one.
Type 1 + 3 Headlamp Piggyback Loom Only
Best for: owners who already have a relay wiring loom and just need a clean trigger feed.
The exclusive AutoVolt® piggyback loom taps your factory high beam at the headlamp connector, giving a safe, non-invasive trigger for your relay loom, plus a dedicated 12V DRL output for LED grilles and DRL strips. Suits Type 1 and Type 3 headlamps. Connectors are included for connection to non-AutoVolt® relay looms.
Type 1 + 3 Headlamp Piggyback Loom + AutoVolt® Relay Loom (2 Outputs)
Best for: the complete, plug-and-play kit
Everything in Option 1 paired with our own relay wiring loom, now with two outputs so you can run more than one light from a single circuit. Full specs are on our AutoVolt® High Beam Relay Wiring Loom page. Suits Type 1 and Type 3 headlamps, with the cleanest plug-and-play installation we offer.
Type 2 Headlamp Pre-Wired Relay Kit
Best for: Type 2 headlamp owners (XLT, Sport and Wildtrak) wanting a simple, vehicle-specific high beam relay.
For Type 2 headlamp only. A pre-wired fused relay built to spec for this vehicle, with enough cable to reach the battery and a trigger cable that connects to the factory high beam wire already in the passenger footwell. Supplied with Ford-specified DuraSeal heat-shrink crimp splices for a sealed, corrosion-resistant joint. No piggyback is included, as Type 2 headlamp vehicles do not use that system. Watch the Type 2 installation video further down this page for full fitting instructions.
Key benefits
| ✓ | Triggers your auxiliary light bar straight from the factory high beam |
| ✓ | Exclusive AutoVolt® design, developed in-house |
| ✓ | Piggyback options install with no cutting or splicing of factory wiring |
| ✓ | Option 2 relay loom with two outputs, a 40A relay and a fused power line |
| ✓ | 12V DRL output on the piggyback options for LED grilles and DRL strips |
| ✓ | Designed specifically for the 2023+ Next Gen Ford Ranger platform |
The AutoVolt® Relay Wiring Loom (Option 2)
Our own relay wiring loom, purpose built to integrate cleanly with modern vehicle electrics. We have upgraded the wire gauge where required and adjusted the length of both the trigger and switch wiring so it routes more naturally for an OEM-style finish. Built using robust components for safe, reliable operation of high-power LED lighting, with a fused power line, 40A relay and weatherproof connectors. The two outputs let you run more than one light from the same switched circuit. Full specs are on our AutoVolt® High Beam Relay Wiring Loom page.
Power capacity
Supplied 15A fuse: safely powers up to 200W combined LED output. Optional upgrade to a 20A fuse where appropriate: up to approximately 250W combined. This rating reflects safe continuous operation and protects your vehicle wiring. If you are unsure about your lighting setup, contact us before purchase and we will be happy to advise.
The AutoVolt® Piggyback Loom (Options 1 and 2)
An exclusive in-house AutoVolt® design, engineered to give a clean high beam trigger feed for your relay loom while also providing a safe, ignition-controlled 12V DRL supply. The DRL output comes live when the truck is started and stays live until it is switched off, making it ideal for LED grille lighting, DRL strips and other low-current DRL-style accessories. Installation is plug-and-play with no cutting of factory wiring, and connectors are included for wider relay loom compatibility.
Choosing the correct headlamp type
The Next Gen Ford Ranger is fitted with different headlamp types depending on model and specification, so you must select the correct type using the product images above. Selecting the right headlamp type is essential for proper fitment and operation.
| Headlamp type | Ford Ranger models and trims |
| Type 1 + 3 headlamp | XL, XLS, Raptor, Premium, and vehicles fitted with the upgraded Matrix headlamps |
| Type 2 headlamp | XLT, Sport and Wildtrak |
Type 1 and Type 3 vehicles use the same piggyback loom and therefore share the same product options.
Please use the product images above to identify your headlamp type before ordering. If you are unsure which version your vehicle requires, contact us first.
Fitting an LED grille or need the DRL function?
The Type 1 + 3 headlamp piggyback includes a 12V DRL output. If you specifically want the DRL feed for an LED grille on a Type 2 headlamp vehicle, you will also need our dedicated 2023+ Next Gen Ford Ranger LED Grille / DRL Piggyback Loom.
Installation and support
New to piggyback looms? Read our guide explaining how they work and how to wire auxiliary lighting safely: Piggyback Wiring Looms Explained. Fitting instructions are available on our Downloads & Instructions page.
Download Type 2 Headlamp Fitting Instructions (PDF)
Installation videos
There are two installation videos, one for each headlamp type. Watch the one that matches your vehicle.
Type 1 + 3 headlamp
Type 2 headlamp
Important: This product must be matched to the correct headlamp type shown in the images above. Option 3 is suitable for Type 2 headlamp vehicles only. If you are unsure which option or headlamp type your vehicle requires, please contact us before ordering.









Reviews
There are no reviews yet.