Description
Interior Light & Extended Brake Light Loom – Another original design created and produced by AutoVolt and not available anywhere else.
Whether you’re adding an interior light, an extended brake light, or integrating central locking (central locking loom to be bought separately and coming soon), this solution makes it simple.
Removed your Sports Bar and fitted a rear canopy? Need a brake light and interior light connection? Or maybe you’ve installed an aftermarket roll bar with a built-in brake light that needs wiring? We’ve listened to Ford Ranger owners and designed a loom that solves it all.
No cutting plugs. No splicing. No soldering. And absolutely no Scotchlocks. This loom connects safely and directly into your original Ford Ranger wiring and gives you the feeds that you need for your own equipment – secure, warranty-friendly, and built with quality in mind.
This 1.5 meter extension gives you the option to piggyback off the factory brake light and rear cab lights which can be used as an extension to your interior lights (see note below)
The interior light feed is taken from the same circuit as the factory rear cab “jellyfish” lights. This means it will operate exactly as those lights do, so it should not be considered a fully independent interior light. Its function is limited to working in the same way as the rear cab lights.
FITMENT CHECK – This loom fits Rangers where the factory sports bar has a high level brake light and two rear cab jellyfish lights (4-pin connector), as shown in the photos. It will NOT fit Rangers where the sports bar has the brake light only, as these use a different connector.
NOTE – This wiring harness will not connect directly into any canopy wiring but will allow you take the required feeds from the circuits mentioned above








Reviews
There are no reviews yet.