Description
Please note, unfortunately this will not fit the Raptor models.
Restore perfect clarity to your reversing camera with the AutoVolt® ClearView™ Number Plate Light Cut-Off Loom. This plug & play solution automatically switches off your number plate lights whenever reverse gear is selected, removing glare, reflections and overexposure on your camera. Ideal for when the bright number plate lights distort and blur the camera image, especially at night or in wet conditions.
The loom installs directly into your vehicle’s existing lighting system using OEM-style connectors and high quality automotive components. No cutting, no soldering and no coding. Simply plug in, secure the loom and enjoy a clearer, safer reversing view.
Why Customers Love ClearView™
- Eliminates number plate glare that washes out reversing cameras
- Fully plug & play with OEM-style connectors
- Cleaner, clearer reversing view at night and in poor weather
Every kit also includes a Free Additional Reverse Light Loom, allowing you to power extra reverse lamps or scene lighting using a stable, high quality power feed. Perfect for anyone needing improved rear illumination.
Want to add an extra reverse light? Our AutoVolt Ultra Slim Reverse Light is the light we tested and validated this loom with. At around 1,400 lumens, E-approved and only 15mm deep, it tucks neatly under the bumper and plugs straight into the additional reverse light output. View the Ultra Slim Reverse Light HERE
❤️ Customer Appreciation & Exclusive Discount
At AutoVolt®, we genuinely appreciate every customer who chooses our products. Many of you already use our original AutoVolt® Reverse Light Loom, and we want to give something back as a thank you for your continued support.
For this reason, we are offering an exclusive discount on the new ClearView™ system to anyone who has previously purchased an AutoVolt® Reverse Light Loom, as you can use it in conjunction with our base setup. No reverse light loom is supplied with this kit.
Simply provide your order number or proof of purchase and your discount will be applied.
This offer is available only for genuine AutoVolt® reverse light looms, as the ClearView™ system is built specifically for AutoVolt wiring standards and will replace other brands of reverse light looms rather than operate alongside them. Your order will be refunded if you do not reply to the evidence email after purchasing the base loom as it is not open to negotiating.
This product is intended for off-road and show use only. The module temporarily interrupts number plate illumination and must not be used on public roads where vehicle lighting regulations apply. It is the installer’s and vehicle owner’s responsibility to ensure compliance with all local laws and regulations.
Frequently Asked Questions
What lights can I use with the additional reverse light output?
This loom has been tested and validated using our own ultra slim reverse light, which we know operate correctly with the vehicle electronics. Other 12V LED reverse lights may also work, however compatibility cannot be guaranteed with all aftermarket lights as designs and internal drivers vary between manufacturers. In rare cases, we have had reports of certain non-AutoVolt lights behaving unexpectedly. For guaranteed performance, we recommend using our tested LED lights.
What is the maximum wattage I can run on the additional reverse light output?
We recommend a maximum of around 20 watts total load when connecting lights directly to the reverse circuit. A single AutoVolt Ultra Slim Reverse Light (21W) has been tested on this output and is fine to run directly without a relay. While higher wattage setups may function, exceeding this recommendation can place unnecessary strain on the vehicle circuit and control modules. For higher power lighting, a relay loom should always be used to safely draw power directly from the battery.
Can I fit two additional reverse lights?
Yes, you can fit two additional reverse lights. However, if you are fitting more than one lamp, we strongly recommend using a dedicated reverse light relay loom. This protects the vehicle circuit by using the reverse signal as a trigger only, while powering the lights safely from a fused battery supply. We offer a purpose made relay loom designed specifically for this application which is available HERE
Do I need a relay loom for one reverse light?
For a single low power LED reverse light, a relay loom is not required, provided the light does not exceed the recommended power rating outlined above. However, using a relay loom is still considered best practice as it reduces load on the vehicle circuit and allows for easier future expansion.
Will this loom cause warning lights or CANBUS faults?
When used as intended and within the recommended load limits, this loom does not cause warning lights or CANBUS errors. Issues are most commonly caused by connecting high power lights directly to the circuit or using incompatible aftermarket lighting. Using tested lights and a relay loom where appropriate minimises any risk.
Is this loom plug and play?
Yes. This loom is fully plug and play and connects using factory style connectors with no cutting, splicing or permanent modification required to the vehicle wiring.
Can I damage my vehicle by using this loom?
When installed correctly and used within the recommended specifications, this loom is safe and does not damage the vehicle. Problems typically arise when excessive load is added without a relay or when unsuitable lighting is used. Following the guidance above ensures safe operation.







Reviews
There are no reviews yet.