Nissan Navara DRL + LED grille piggyback loom

£24.98

Vehicle-specific Nissan Navara piggyback loom for adding low-current DRL or LED grille lighting without cutting or splicing the factory wiring.

In stock

Description

This loom is specifically designed to power the 3 standard LED grille lights found on the Nissan Navara NP300, as shown in the picture. It provides a simple plug-and-play solution for these low-power lights. However, if you plan to install a light bar or any higher wattage lighting, you must use a relay wiring loom to safely handle the increased power demand and protect your vehicle’s electrical system.

I wasn’t satisfied with any of the LED grill lighting solutions I found, mainly for two reasons:

I dislike tapping into the vehicle’s wiring, as I’ve seen the long-term issues with moisture creeping into wiring looms.

The method I used to wire directly into the fuse box was a hassle, especially when disconnecting it for things like MOTs or warranty work at Ford.So, I came up with a new solution. You unplug the headlight adjuster, plug in my loom, and then connect your LED wiring.This allows you to wire your LEDs in a completely safe and non-invasive way, with the option to either solder and use heat shrink or use waterproof butt connectors.

The best part is that it won’t interfere with your vehicle’s CAN system or BCM, and the LEDs will turn on with the ignition, so you don’t need to have your headlights on.

Benefits:

1. No cutting into your vehicle’s main wiring loom – your wiring stays untouched, making this a safer option.

2. Plug-and-play installation—no need for mechanical or electrical knowledge. Just join your LED grill’s red to red and black to black. (An inline fuse is recommended for safety.)

3. Keep your warranty intact—if you need to take your vehicle in for warranty work, simply unplug the loom and reconnect your original wiring. This ensures the dealership can’t blame any issues on your aftermarket lights.

4. Easy removal for MOTs—If your vehicle is at risk of failing an MOT due to having more than two DRLs, you can easily unplug the lights beforehand.

This method will keep your LED lights on when the vehicle is running. They will act the same as a DRL but will also stay on with your headlights and main beam on and is designed for off-road use only.

New to piggyback looms? Read our guide explaining how they work and how to wire auxiliary lighting safely.

Additional information

Weight 70 g
Dimensions 23 × 17 × 3 cm

Reviews

There are no reviews yet.

Be the first to review “Nissan Navara DRL + LED grille piggyback loom”

Your email address will not be published. Required fields are marked *

×