Description
The AutoVolt piggyback loom is the clean, plug-and-play way to power LED DRL fog light surrounds on the Ford Ranger 2011-2022. It plugs into the Ranger’s headlight adjuster connector to give you an ignition-switched live for your DRL rings. No cutting, no scotch locks, no fuse taps.
Please Note
- Wiring loom only. The fog light surrounds and lights shown are NOT included.
- Powers the DRL function only. It does not power the indicator on surrounds with a built-in indicator. Leave the indicator wire insulated and unconnected.
- Always refer to the manufacturer’s wiring diagram supplied with YOUR OWN lights to identify the correct wire for each circuit. Wire colours vary between brands.
Key Features
- Plugs into the factory headlight adjuster connector
- No cutting or splicing into the vehicle wiring
- DRLs switch on with the ignition at full brightness
- One loom powers both fog light surrounds
- Supplied with matching connectors to fit onto your lights
- Warranty safe, simply unplug to return the vehicle to standard
- 18 AWG OEM spec wire, tested before dispatch
Compatible With
Ford Ranger 2011-2022 (T6, T7 and T8). Suits LED DRL fog light surrounds, including versions with a built-in indicator (DRL function only).
Powering Both Lights
One loom is enough for both fog light DRLs. The loom has a single positive and earth output, so you will need to make a simple splitter:
- Run twin core cable from the loom output to each fog light.
- Join both positive wires to the loom’s red output and both earth wires to the black output.
- Fit the supplied matching connectors and connect to the DRL positive and earth wires on each surround, using the manufacturer’s wiring diagram.
- Seal every joint and tie the cable away from heat and moving parts.
Need cable for the splitter? Add our 12V Twin Core Thinwall Cable here.
Wiring Overview
| Loom red (+) | DRL positive on both surrounds |
| Loom black (-) | Earth on both surrounds |
| Indicator wire | Not used, insulate and leave unconnected |
Running a light bar or higher-wattage lighting? Use a relay wiring loom to protect your vehicle’s BCM. View the relay loom.
What’s in the Box
- 1 x AutoVolt Ford Ranger 2011-2022 piggyback loom
- 1 x set of matching connectors to fit onto your lights
- Lights and twin core cable sold separately
Fitting Instructions
The loom fits the same way as our grille light loom. Watch the video below or download the PDF fitting instructions.
Specifications
| Voltage | 12V |
| Connection | Headlight adjuster plug, plug and play |
| Output | Ignition-switched live (DRL) |
| Wire | 18 AWG OEM spec |
| Lights included | No |
| Connectors included | Yes, matching set for your lights |
Designed and built in Northern Ireland. New to piggyback looms? Read our guide.





Reviews
There are no reviews yet.