Description
Not every lighting solution needs to be vehicle-specific. This Universal LED Light Set gives you five high-output LED lights that can be mounted and used in a huge range of applications. As seen in the product images, they work brilliantly as work lights on a roof basket or roll bar, but the possibilities go well beyond that. Reverse lights, perimeter lighting, under-tray illumination, load area lighting, boat and marine use, agricultural machinery, wherever you need reliable, bright 12V lighting, this set delivers.
Independently tested by the AutoVolt team, the set produces a combined 53 W of output with a current draw of just 3.82 A, impressive light output for the size of the kit, and easily handled by a standard relay setup.
Popular Uses
- Work lights on roof baskets, roof racks and roll bars
- Off-road reverse lights when paired with a compatible piggyback and relay harness
- Load area and truck bed lighting
- Perimeter and under-vehicle lighting
- Trailers, boats and marine applications
- Agricultural and plant machinery
- Any 12V vehicle or equipment requiring supplementary lighting
Wiring It Up
We make a 5 Way Splitter Cable → built specifically for this kit. It combines all five light connectors into one tidy run and terminates in just two wires, positive and negative. The whole length is sheathed in 10mm PVC convoluted tubing, so it takes the rubbing and vibration instead of the wire doing it, which is what kills most aftermarket lighting installs.
It measures 165cm from the tip of the connectors to the bare feed end, which is left open so you can join it to whatever length suits your install. Measure your run first, then add 12V twin core thinwall cable → by the metre to reach your switch or battery. It is rated 21 amps, comfortably above the 3.82 A this set draws.
Always fit an inline fuse rated for your load, as close to the power source as practical.
Once wired up you have two straightforward options for powering the lights:
- Remote Relay Loom – power the lights using our AutoVolt Remote Controlled Relay Kit → for clean switched control from inside the cab
- Piggyback & Relay Harness – when used off-road as reverse lights, connect via a compatible piggyback and relay harness so the lights activate automatically with your reverse gear. Find the right piggyback loom for your vehicle here →
See Them Fitted – Ford Ranger 2022 Example
Watch the video below to see these lights fitted to a 2022 Ford Ranger using the AutoVolt Remote Controlled Relay Kit, a great example of how clean and straightforward the install can be.
AutoVolt Verified
This product has been tested by the AutoVolt team. We only stock products we’ve verified ourselves. Measured combined output across all five lights:
| Power | 53 W |
| Current Draw | 3.82 A |
| Test Voltage | 13.9 V |




Reviews
There are no reviews yet.